High Strength PP Fiber for Concrete Reinforcement Anti Crack Polypropylene Fibre

• Customization: Available
• Fiber Type: Filament
• Tensile Strength: 450MPa
• Model NO.: SAP47S/55S/65S
• E-Modulus: 4300MPa
• Ignition: 580 Degrees Celsius
• Usage: Concrete, Filling Material, Spinning, Non-Woven Fabric
• Material: 100% Polypropylene
• Feature: Anti-Pilling, Abrasion-Resistant, Flame Retardant, Anti-Distortion, Anti-Static
• Pattern: Plain
• Color: White
• Function: High Strength Fiber
• Structure: Synthetic Carbon Chain
• Width: Diameter: 20-50um
• Transport Package: Bag+Box+Pallet
• Specification: D: 20-50um, L: 6-18mm
• Trademark: SAPEN
• Origin: Shanghai, China
• HS Code: 5503400000
• Production Capacity: 2000t/Year

Product Description

Micro Monofilament PP Fibre

(SAP 106S/112S/118S)

Description
Micro-reinforcement system for concrete-100% virgin polypropylene monofilament fibers containing no reprocessed olefin materials. Micro pp fiber is designed to control plastic shinkage and settlement cracking in concrete.
Applications

• Slabs on ground
• Side-walks, driveways,decks, curbs
• Precast elements
• Overlays / toppings
• Tunnel shotcrete
• Roads / Pavements
• Bridge Decks

Benefits

• Reduces plastic shrinkage cracking.
• Improves impact, shatter and abrasion resistance
• Increases cohesion and reduces segregation
• Reduces freeze/thaw damage
• Promotes uniform bleed and reduces bleed water to prolong the life of the building.
• Cost saving, Is easier to use,to disperse and safe to handle.
• Can be used in highly corrosive circumstance.

Technical Information

Tensile Strength	>450 MPa
Modulus	>4300 MPa
Monofilament pull-out force	>11.0 CN
Fibre dimension	Length: 6mm / 12mm / 18mm; Diameter:22-45μm
Melt Point	170ºC
Ignition	580ºC
Density	0.91g/cm^3
Acid&Alkali Resistance	Excellent
Moisture Content	≤0.41%
Appearance	White, bundled monofilament
Safety	Non-toxic, non-irritating, neutral

Guidelines for use
The dosage rate is dependent on the application and should be 0.9 kg/m³-1.5kg/m³.
Generally keep the original mix ratio and the stressed steel bar, no need to change.
Mixture method and time. Pouring dry materials (sand, cement, etc.) and the fibre evenly, before pouring water. Dry stirring for 30-60 seconds. After pouring water, stirring, and the stirring time should be 30-60 seconds longer than usual.

Packing
1kg/bag,660kg/pallet, 6,600kg/20'container,13,200kg/40' container. Can be coutomizable.

PP Fibre is very easy to mix,below is step of manufacture

Packing method: 1kg/bag, 5kg/box, 660kg/pallet